ON SALE

Digital Clamp-On Tester

USD $45

UEI DL49 Digital Clamp-On Tester – New in opened packaging

Stock: 1

Place order

UEI DM200 Digital Multimeter

USD $35

UEI DM200 ElectroMate Digital Multimeter – New in packaging

Stock: 5

Place order

UEi DL49 Ruggedized, AC/DC Clamp-On DMM

USD $50.00

The DL49 is ideal for HVAC/R technicians, electrician’s and plant maintenance professionals. With the ability to measure AC and DC amps, along with-featured DMM capabilities, the DL49 makes testing generators, compressor pump motors, and power converters quick and easy. It’s compact size and convenient case makes it easy to carry and use.  Ranges:

• Frequency – 50 – 400 Hz
• DC A – 400A
• AC A – 400A
• AC V – 600V
• DC V – 600V
• Ohms – 40 MOhms

Stock: 1

Place order

UEI SSM1 Super Heat / Sub Cooling Meter

USD $150

The Uei SSM1 is used to measure superheat and subcooling by direct connections for temperature and pressure. The SSM1 is programmed with the most common four refrigerants, with data from the NIST-Pro refrigeration database for temperature-pressure values.

• Measures pressure from 0-500 psi
• Measures temperature from -40-400 F
• Calculates superheat for low side
• Calculates subcooling for high side
• Refrigerants included for calculations – R22, R134a, R404a, R410a

Stock: 1

Place order

UEi TA2K -40 to 1200F Dual Input Adapter

USD $50

The TA2K will convert any multimeter with .001 volt DC measurement capability into a dual input temperature tester! Temperature (either ˚F or ˚C), is converted to millivolts and shows up on your DMM display just as it does on a digital thermometer.  This adapter plugs directly into DMM’s that use industry-standard 4mm jacks. It includes differential mode, which is great for checking air conditioning system’s superheat and the forward-facing control panel makes changing modes easy.

Stock: 1

Place order

UEI DM2000 Digital Multimeter

USD $35

The DM200 ElectroMate will perform everyday basic electrical tests easily and economically. Connect the test leads, turn the DM200 on, set the function switch to the proper setting and you are ready to take AC/DC volt, continuity or resistant measurements.

• Max. voltage between any terminal and earth ground: 600V
• Digital Display: 3-1/2 digits, 2000 counts with automatic polarity indication
• Reading Time: 2-3 readings per second
• Input Impedance: 10 MOhm
• Storage Temperature: 14° to 122°F (-10° to 50°C)
• Operating Temperature: 32° to 104°F (0° to 40°C)
• Battery Type: 9V, NEDA 1604 or IEC 6LR61
• Battery Life: 200 hours
• Size (H x W x L): Without boot 36 x 70 x 140 mm; With boot 54 x 80 x 154 mm

Stock: 6

Place order

UEI ATT20B Temperature Probe

USD $15

Technical data is not available on this probe, but it is assumed that its characteristics would be similar to the UEI ATT62 temperature probe.

Stock: 2

Place order

UEI 15′ Sealed Temperature Probe

USD $15

The UEi ATT62 is a sealed thermistor probe designed for measuring ambient and surface temperatures.

The ATT62 features a 14.8 ft. cable with a 3.5 mm connector plug that is compatible with the following UEi products: DT15A, DT20A, DT40, DTH31

Stock: 1

Place order

UEI DCM3 Digital Capacitance Meter

USD $15

This portable meter comes brand new with test leads, a manual, and the meter still in its wrapping.

Stock: 3

Place order