Quick Search: Hit CONTROL-F to search THIS page with your browser! |
Welcome To The Sphere Research Canadian Test Equipment Site ! RF / Microwave Scalar + Vector Network Analyzers | ||||
![]() Click REFRESH on your browser if pages seem unchanged ![]() ![]() ![]() | ![]() Please Note: All Prices are in US$ |
Sphere Research Corporation 3394 Sunnyside Rd. West Kelowna, BC, Canada V1Z 2V4 Phone: +1 (250) 769-1834 FAX:+1 (250) 769-4106 A great source for test equipment, repairs, calibrations, useful metrology information, and of course, SLIDE RULES! JUST SCROLL DOWN TO SEE EVERYTHING ! |
![]() ![]() Parts by the Foot! |
Now OPEN, our ![]() Literally millions of parts available at great prices! |
![]() |
![]() ![]() |
|
![]() Microwave Vector and Scalar Analyzers ![]() ![]() ![]() Interested in RF Diodes (Varactors, PINs, Mixers)? CLICK HERE. Interested in RF Crystals, Filters and Oscillators? CLICK HERE. ![]()
You can order anything here just by picking up the phone, and calling (250) 769-1834 during normal office hours, 8:30AM to 4:30PM PST, or FAX to (250) 769-4106. OR, Email your order to Susan ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]()
|
RF Diodes![]() CLICK to see! |
RF Transistors/ICs![]() CLICK to see! |
RF Components![]() CLICK to see! | RF Tubes![]() CLICK to see! |
RF Power Meters![]() YOU ARE HERE! |
![]() |
Pacific Measurements PM / Wavetek 1038-D14 Series RF Scalar Analyzers and Sensors to 26.5Ghz Very popular Scalar Analyzers, they accept up to 3 sensors, and display 2 channels of level data, which can be corrected against a reference channel. The 1038-D14 has real time analog operation and digital storage (allows very slow sweeps and trace comparison), and with suitable external sweep generators like the HP 8620C, and the correct sensors, provides full S-parameter analysis at full microwave frequencies. Built in front panel calibrator and accessory storage drawer. XY recorder outputs at rear. Accepts many plug in styles for high versatility. All frames are calibrated with the C10 factory calibration fixture. |
PMI/Wavetek Sensors![]() CLICK for Bigger PIC! |
Measuring RETURN LOSS ![]() CLICK for Bigger PIC! |
Measuring INSERTION LOSS ![]() CLICK for Bigger PIC! |
Measuring RETURN LOSS ![]() CLICK for Bigger PIC! |
Measuring INSERTION LOSS ![]() CLICK for Bigger PIC! |
Measuring BOTH ![]() CLICK for Bigger PIC! |
![]() PM/Wavetek 1038-D14 Scalar Aanalyzer c/w H13/V13 Plug-ins |
PMI 1038 high performance scalar analyzer, equipped for 18Ghz operation with 3 plugs ins (H13, V13, V13), 2 ea. 13782 sensors. The H13 has a +10dBm RF calibrator source (front panel) for system set up. Fully overhauled, drift tested and frame calibrated with C-10 factory reference fixture. Available with several sensor/cable systems, see below for additional sensors. Ideal for use with microwave sweep generators like the HP 8620C, Weinschel 430 series, and Wiltron 610D and similar units. Supports both high speed logarithmic readings in dB and dBm, plus relative reference operation in several modes and display/offset factors. Extremely flexible and powerful, ideal for combined return loss, passband and power measurements with directional couplers. Individual sensor calibration provided at each plug in. Most companion sensors can provide at least 50dB and often up to 60dB of stable dynamic range. Includes: H13 or H12 Horizontal Plug-in V13 or V12 Vertical Plug-in (depending on availability) V13 Vertical Plug-in 2 ea. 13782 Sensors (Type N(m)) c/w cables (1Mhz to 18Ghz) Important! to get the best performance from all sensor based power/analyzer systems, allow at least a 30 minute temperature stabilization period after power up, and avoid sudden temperature changes at the sensor location. ALWAYS match the sensor to the plug-in, or calibration will be incorrect! |
2-Channel DIGITAL STORAGE! ![]() CLICK for bigger PIC! ![]() CLICK for bigger PIC! Can support up to 3 sensors, A, B, Reference. Includes operating manual reprints. |
|
![]() |
Checked, Cal'd. | Model 1038-D14 | |
![]() PM/Wavetek Rackmount 1038-D14 Scalar Aanalyzer c/w H13/V11/V12 Plug-ins |
PMI 1038 high performance scalar analyzer, equipped for 18Ghz operation with 3 plugs ins (H13, V11, V12), 1 ea. 13782 sensor. The H13 has a +10dBm RF calibrator source (front panel) for system set up. Fully overhauled, drift tested and frame calibrated with C-10 factory reference fixture. Available with several sensor/cable systems, see below for additional sensors. Ideal for use with microwave sweep generators like the HP 8620C, Weinschel 430 series, and Wiltron 610D and similar units. Supports both high speed logarithmic readings in dB and dBm, plus relative reference operation in several modes and display/offset factors. Extremely flexible and powerful, ideal for combined return loss, passband and power measurements with directional couplers. Individual sensor calibration provided at each plug in. Most companion sensors can provide at least 50dB and often up to 60dB of stable dynamic range. Includes: H13 Horizontal Plug-in V12 or V11 Vertical Plug-in, depending on availability V12 Vertical Plug-in 1 ea. 13782 Sensor (Type N(m)) c/w cable (1Mhz to 18Ghz) Important! to get the best performance from all sensor based power/analyzer systems, allow at least a 30 minute temperature stabilization period after power up, and avoid sudden temperature changes at the sensor location. ALWAYS match the sensor to the plug-in, or calibration will be incorrect! |
2-Channel DIGITAL STORAGE! ![]() CLICK for bigger PIC! ![]() CLICK for bigger PIC! Can support up to 3 sensors, A, B, Reference. Includes operating manual reprints. |
|
![]() |
Checked, Cal'd. | Model 1038-D14 | |
![]() PM/Wavetek 1038-D14A Scalar Aanalyzer c/w N10 Computing Plug-in |
PMI 1038 D14A high performance scalar analyzer, equipped for 18Ghz operation with N10 computing plug in with digital display, and 1 ea. 15176 (Tpe N) and 1 ea. 15177 (APC-7) sensors. The N10 has a 0dBm RF calibrator source (front panel) for system set up. Fully overhauled, drift tested and frame calibrated with C-10 factory reference fixture. The N10 adds direct digital display of power level at the cursor location (see display vertical cursor line) on both A and B channels. Available with several sensor/cable systems, see below for additional sensors. Both N and APC-& sensors are provides with the system, for maximum flexibility. Ideal for use with microwave sweep generators like the HP 8620C, Weinschel 430 series, and Wiltron 610D and similar units. Supports both high speed logarithmic readings in dB and dBm, plus relative reference operation in several modes and display/offset factors. Extremely flexible and powerful, especially with built in digital displays, ideal for combined return loss, passband and power measurements with directional couplers. Can also work as a 2 channel stand alone digital power meter (using internal sweep). Individual sensor calibration provided at each plug in. Most companion sensors can provide at least 50dB and often up to 60dB of stable dynamic range. Includes: N10 digital display Plug-in 1 ea. 15176 Sensor (Type N(m)) c/w cable (1Mhz to 18Ghz) 1 ea. 15177 Sensor (Type APC-7) c/w cable (1Mhz to 18Ghz) Important! to get the best performance from all sensor based power/analyzer systems, allow at least a 30 minute temperature stabilization period after power up, and avoid sudden temperature changes at the sensor location. ALWAYS match the sensor to the plug-in, or calibration will be incorrect! |
2-Channel DIGITAL STORAGE DIGITAL DISPLAY! ![]() CLICK for bigger PIC! ![]() CLICK for bigger PIC! Can support up to 3 sensors, A, B, Reference. Provides digital power display on channles A and B of current cursor position. Includes operating manual reprints. |
|
![]() |
Checked, Cal'd. | Model 1038-D14A/N10 |
IMPORTANT ! Graphical logos and trademarks are the property of their respective owners, including PMI, Wavetek, Tektronix, Fluke, General Radio and Hewlett Packard, and are used here merely to unambiguously identify the products. Sphere Research IS NOT a factory authorized distributor for any of the product lines indicated. | ![]() Return Home |
![]() | You are visitor number
![]() ![]() Site Design & contents copyright 1997, 1998, 1999, 2000, 2002, 2003, 2008, 2011, 2013, 2014 by Walter Shawlee 2 & the ad hoc Godzilla Graphics Group. All rights reserved.
|