| Quick Search: Hit CONTROL-F to search THIS page with your browser! |
 |
Tektronix CRT (Cathode Ray Tube) and LCD Information | |
|
|
Tektronix CRT and LCD Data
Tektronix / Tek
Cathode Ray Tubes (CRTs)
 Skip the INTRO, Go RIGHT to the CATALOG!
 We no longer stock or sell Tek CRTs, but the info here may prove useful in matching the tube you need to your instrument.
We are searching for these useful CRTs all the time, and try to keep this section stocked with as wide an assortment as possible, EMAIL US if you have good tubes available for sale. Here's your chance to get some truly amazing parts at great prices. Quantities are limited, so when they are gone, that's it.
 NAVIGATION: To make your life easier, and help you find exactly what you want, we have broken the on-line equipment catalogs into smaller sections. Just CLICK on the item you are looking for at the left, to see the matching catalog. Large graphical catalogs are a bit SLOW, so please give them a bit of time to load. The top header of each catalog is largely the same, so don't think you are stuck in one place!
You can order anything here just by picking up the phone, and calling (250) 769-1834 during normal office hours, 8:30AM to 4:30PM PST, OR, Email your order to Susan  HERE.
 SHIPPING: Preferred and Alternate Methods as of June 4, 2013, CLICK for FULL DETAILS ON OUR FAQ Page. Rates are now changing rapidy, often with little notice to us, so all the data has been transferred to the FAQ page for speedy updating.
 E-Mail Susan if you want a quote for shipping to other destinations, or for something heavy. Sorry, we can't safely send most individual small parts in a regular letter envelope, they get destroyed by the automated handling equipment. Sometimes we can ship very rugged parts in a small padded envelope by letter post. Ask Susan.
There is a packing charge for large or heavy equipment, see the FAQ for details.
If we have your valid data on file, you can just click on the ORDER email link to place an order and indicate your approval to bill, and we will do the rest. We keep your active information for ONE YEAR for your convenience.
If this is the first time you have dealt with us, you can phone +1 (250) 769-1834 to supply the billing info, or send it by the email link, as you prefer. We accept VISA/MC, international money order, Paypal (to Susan@Okanagan.net), and bank wire transfer. Please note that there are transaction fees with Paypal and wire transfer payments, the wire transfer fee is frankly horrifying.
CONDITION: We have both new and used CRTs (tested where possible), and we destroy any marginal tubes so they do not re-surface elsewhere. At the very least, all pass a filament continuity test, and have no burns or marks, are clean and have a good vacuum. Please note, CRTs are bulky to ship, and there is no such a thing as cheap shipping for these tubes. The CATALOG will appear below shortly!
Don't forget these illustrated sections take a few seconds to load, but they are worth the wait!
|
Common Tektronix Scopes and CRT's
cross-reference chart
| Tektronix Scope |
Tube Number |
NOTES |
| 211/212 |
154-0699-00 |
Standard/P31 |
| 214 |
154-0732-00 |
Standard/P31 |
| 222/A/PS |
154-0917-00 |
Standard/P31
85ACB31 |
310, 310A,
315, 360 |
154-0366-00 |
Standard/P31 |
| 323 |
154-0519-00, -01 |
Standard/P31, -01 P7. Sony tube. |
| 326 |
154-0667-00, -01 |
Standard/P31, -01 mechanically strengthened. Sony tube. |
| 326 |
154-0667-02, -03 |
Slow P7, -03 mechanically strengthened. Sony tube. |
| 335 |
154-0726-05 |
P31. Sony tube. |
| 422 |
154-0466-00 |
Standard/P31, -05 after s/n 1890 |
| 434 |
154-0666-10 |
(Storage) Standard/P31, -12 for option 1 |
| 453 |
154-0492-04 |
Standard/P31, -06 later serial numbers |
| 453A |
154-0630-10 |
Standard/P31, integral scale, can also work in 453. |
| 453A |
154-0630-00 |
Standard/P31, -05, -10 later serial numbers |
| 454 |
154-0505-00 |
Standard/P31 |
| 454A |
154-0619-00 |
Standard/P31,
-05 B10.47K-B19.99K, -10 B20K+
-07/-12 P2, -08/13 P7, -09/14 P11 |
| 455 |
154-0731-00 |
Standard/P31 |
| 465 |
154-0676-15
154-0731-00 |
Standard/P31 |
| 465B |
154-0731-00 |
Standard/P31, -04 P11 |
| 465M |
154-0777-00 |
Standard/P31 |
| 475 |
154-0677-10 |
Standard/P31, -14 P11 |
| 485 |
154-0652-00/05 |
-Standard/P31, -00 to B091499, -05 after |
| 491 |
154-0502-00/05 |
-Standard/P7 |
| 492, 494, 496 |
154-0809-00 |
-Standard |
| SC501 |
154-0699-00 |
Standard/P31, black graticule |
| SC502 |
154-0730-00/05/08 |
Standard/P31, black graticule |
| 502/502A |
154-0246-00
154-0248-00 |
Dual Beam, Standard/P2, -0248 P11. |
| SC503 |
154-0812-00 |
Storage/P44, black graticule |
| SC504 |
154-0730-05
154-0859-00 |
Standard/P31, black graticule
Standard/P31, orange graticule |
| 520, 521, 522, 528 |
154-0825-00 |
Standard/ P31, integral lighted graticule with NTSC |
| 528 |
154-0525-10 |
Standard/ P31, other numbers for integral graticule with CCIR, NTSC, etc. |
| 529/RM529 |
154-0514-10 |
Standard/ P31, late serial numbers. |
| 541/545 |
154-0089-00 |
Optional/P7 |
| 541/545 |
154-0409-00 |
Standard/P31 |
| 541A/545A |
154-0758-00 |
Standard/P31 |
| 543B/545B |
154-0478-00, 154-0568-00 |
Standard/P31 |
| 561 |
154-0449-00 |
Standard/P31 |
561A
567
568 |
154-0613-00 |
Standard/P31 |
| 561B |
154-0531-00 |
Standard/P31 |
| 564 |
154-0410-00 |
Storage/P200 (no graticule) |
| 564B |
154-0565-00 |
Storage/P200 (no graticule) |
| 570, 575 Curve Tracers |
154-0343-00 |
P31 (no graticule) |
| 602 |
154-0562-00 |
Standard/P31 |
604
604A |
154-0633-05, 10 |
Standard/P31, black graticule |
| T922 |
154-1271-00 |
Standard/P31 |
| 1240 |
154-0656-00 |
Standard/P31/W Yoke coil (magnetic defl.) |
| 1241 |
154-0885-00/01 |
Special for color/W Yoke coil (magnetic defl.) |
| 1502 |
154-0667-02 |
Standard/P31 |
| 2205 |
154-0929-00 |
Standard/P31 |
| 2213 |
154-0838-00 |
Standard/P31 |
| 2215 |
154-0838-00 |
Standard/P31 |
| 2216 |
154-0969-00 |
Standard/P31 |
| 2232 |
154-0861-00 |
Standard/P31 |
2235
2236 |
154-0861-00 |
Standard/P31 |
| 2246/A |
154-0905-00 |
Standard/P31 |
2335
2336
2337 |
154-0832-00 |
Standard/P31 |
| 2430/A |
154-0850-01 |
Standard/P31 |
| 2445/B |
154-0850-00/01 |
Standard/P31 |
| 2455/B |
154-0850-00/01 |
Standard/P31 |
| 2465/A/B |
154-0850-00/01 |
Standard/P31 |
| 5110 |
154-0633-10 |
Standard/P31 |
| 5111/D11 |
154-0572-10 |
Storage/P400 |
| 5113, D12, D13 |
154-0635-00 |
Standard/P31, -09 is blue P11 |
| 5440 |
154-0701-00, 05 |
Standard/P31, -00 to s/n B073742,
-05 subs.
-08/P7, -09/P11. 154-0684-00 opt. 2 only. |
| 7104 |
154-0783-00 |
Standard/P31 1GHz microchannel CRT |
| 7313 |
154-0682-02/10 |
Storage/P400, later s/n -12. |
| 7403 |
154-0640-00, 05 |
Standard/P31, s/n >80K are -05 |
| 7514 |
154-0622-00 |
Storage/P31. |
| 7603 |
154-0640-00
154-0822-00 |
Standard/P31, later s/n -05, -10. |
| 7603 |
154-0672-00/05 |
Option 4. |
| 7603 |
154-0673-00 |
Option 6. |
| 7613 |
154-0670-00, 10 |
Storage, -00 to 10199, -10 on. |
| 7623A |
154-0723-00 |
(Storage) Standard/P31. |
| 7633 |
154-0721-00 |
(Storage) Standard/P31. |
| 7704 |
154-0609-00 |
Standard/P31, later s/n -05, optional P11 -09. |
| 7704A |
154-0644-05 |
Standard/P31. |
| 7844 |
154-0713-00 |
Standard/P31, -04 P11. |
| 7903/7904 |
154-0644-05 |
Standard/P31, -09 P11. |
| 7904A |
154-0893-05
Possibly 154-0644-05 |
Standard/P31. |
More cross reference data and service / troubleshooting info
located at the bottom of this page! |
Having CRT problems with your Tek scope? check this info first before changing the tube:
Assuming you have correct CRT gun bias (look in the manual, and don't skip this adjustment!), and have looked at the horizontal and vertical drive signals, and they are UNDISTORTED, then:
Odd waveform distortion (humps, curves, sudden angles) that is in the
same physical place on the CRT (regardless of control settings)
especially of very unusual shape, is generally caused by:
1. Magnetic interference: this can be accidentally magnetized parts
within the CRT, adjacent hardware or an external source. move the
scope, if the interference is unchanged, degauss the tube and chassis
with a standard TV degaussing coil (or any home made one excited by
AC). If this improves matters, keep looking for the exact offending
part, and degauss again, or remove the hardware that is magnetized.
You can usually cure this problem, but it is time consuming. Severe
magnetic distortion can be caused by a single magnetized screw in the
wrong place. Don't sit a scope on top of a speaker cabinet or by
speakers,, or near anything with a magnetron in it, the results can
be serious.
2. Mechanical distortion within the tube: if the above technique
doesn't work, the tube or scope has probably been dropped, and the
shock has broken or bent an internal electrode or support. If the
tube exhibits the identical distortion outside the chassis, with the
shield removed, it is damaged, and has to be replaced.
Other CRT issues:
3. If the display is crooked relative to the gracticule lines (goes at
an angle), this is almost always the trace rotation adjustment, which
may not be easy to find or readily accessible in some models.
Generally, it is DC bias applied to a coil around the CRT neck, you
may be able to find the control by following the coil wires back to
the PC board. It is VERY common for this to be out of adjustment
after shipping. calibration is not affected.
4. If the display is turned up or down at the corners, or has an angled
appearance, it is probably the geometry adjustment, and this can be
complex to set, you must use the manual and follow the CRT alignment
carefully. Calibration is affected. Some scopes have supplemental X
or Y axis alignment as well, generally via coils.
5. If strange trace effects occur at the face of the tube when touched,
it probably indicates high static build up on the display filter, or
tube face. Clean the parts, then wipe everything down with a
standard anti-static wipe, the effect will disappear. Plastic can be
very highly charged when rubbed with a synthetic cloth for cleaning.
Use a damp cotton cloth or anti-static wipe to avoid this effect
.
Tek number cross reference for older CRT's
courtesy of:
Craig Sawyers email- c.sawyers@tech-enterprise.com -
5ABP1 - 154-0068-00
5ABP7 - 154-0069-00
5ABP11 - 154-0070-00
5BGP1/T51P1A - 154-0080-00
5BGP2/T51P2A - 154-0081-00
5BGP7/T51P7A - 154-0082-00
5BGP11/T51P11A - 154-0083-00
5BGP16/T51P16A - 154-0092-00
5BGP24/T51P24A - 154-0124-00
5BHP1/T54P1 - 154-0106-00
5BHP2/T54P2 - 154-0098-00
5BHP7/T54P7 - 154-0104-00
5CAP1/T52P1 - 154-0093-00
5CAP2/T52P2 - 154-0097-00
5CAP7/T52P7 - 154-0102-00
5CAP11/T52P11 - 154-0103-00
5CAP16/T52P16 - 154-0162-00
5CBP1/T55P1 - 154-0125-00
5CBP2/T55P2 - 154-0120-00
5CBP7/T55P7 - 154-0126-00
5CBP11/T55P11 - 154-0127-00
5CBP16/T55P16 - 154-0161-00
5CBP24/T55P24 - 154-0177-00
T502P1/T60P1 - 154-0172-00
T502P2/T60P2 - 154-0144-00
T502P7/T60P7 - 154-0170-00
T502P11/T60P11 - 154-0173-00
T517P1H/T54P1H - 154-0107-00
T517P2H/T54P2H - 154-0109-00
T517P7H/T54P7H - 154-0108-00
T517P11H/T54P11H - 154-0105-00
T517P16H/T54P16H - 154-0128-00
T536P1/T56P1 - 154-0140-00
T536P2/T56P2 - 154-0133-00
T536P7/T56P7 - 154-0135-00
T536P11/T56P11 - 154-0136-00
T536P16/T56P16 - 154-0169-00
T551P1/T57P1 - 154-0186-00
T551P2/T57P2 - 154-0160-00
T551P7/T57P7 - 154-0189-00
T551P11/T57P11 - 154-0143-00
515A and RM15
=============
5CBP1/T55P1 - 154-0125-00
5CBP2/T55P2 - 154-0120-00
5CBP7/T55P7 - 154-0126-00
5CBP11/T55P11 - 154-0127-00
5CBP16/T55P16 - 154-0161-00
5CBP24/T55P24 - 154-0177-00
536
===
T536P1/T56P1 - 154-0140-00
T536P2/T56P2 - 154-0133-00
T536P7/T56P7 - 154-0135-00
T536P11/T56P11 - 154-0136-00
T536P16/T56P16 - 154-0169-00
551
===
T551P1/T57P1 - 154-0186-00
T551P2/T57P2 - 154-0160-00
T551P7/T57P7 - 154-0189-00
T551P11/T57P11 - 154-0143-00
502
===
T502P1/T60P1 - 154-0172-00
T502P2/T60P2 - 154-0144-00
T502P7/T60P7 - 154-0170-00
T502P11/T60P11 - 154-0173-00
524AD
5ABP1 - 154-0068-00
5ABP7 - 154-0069-00
5ABP11 - 154-0070-00
531, 535, RM31, RM35
====================
5BGP1/T51P1A - 154-0080-00
5BGP2/T51P2A - 154-0081-00
5BGP7/T51P7A - 154-0082-00
5BGP11/T51P11A - 154-0083-00
5BGP16/T51P16A - 154-0092-00
5BGP24/T51P24A - 154-0124-00
525, 532, RM32, 570, 575
========================
5CAP1/T52P1 - 154-0093-00
5CAP2/T52P2 - 154-0097-00
5CAP7/T52P7 - 154-0102-00
5CAP11/T52P11 - 154-0103-00
5CAP16/T52P16 - 154-0162-00
517A
====
T517P1H/T54P1H - 154-0107-00
T517P2H/T54P2H - 154-0109-00
T517P7H/T54P7H - 154-0108-00
T517P11H/T54P11H - 154-0105-00
T517P16H/T54P16H - 154-0128-00
541, 545, RM41, RM45
====================
5BHP1/T54P1 - 154-0106-00
5BHP2/T54P2 - 154-0098-00
5BHP7/T54P7 - 154-0104-00
5BHP11/T54P11 - 154-0099-00
5BHP16/T54P16 - 154-0118-00
5BHP24/T54P24 - 154-0152-00
And here's some more, where x denotes the phosphor.
316, RM16, RS16
===============
T316Px/T32Px
503, 504
========
T503Px
526
===
T526Px
531A, RM31A, 533, RM33, 535A, RM35A
===================================
T533Px/T64Px
541A, RM41A, 543, RM43, 545A, RM45A
===================================
T543Px/T65Px
555
===
T551Px/T59Px
581, 585
=======
T581Px
507
===
T507Px/T53Px
519
====
T519A - P11 phosphor only
551 listed above was later replaced by T5511Px
502 listed above was later replaced by T5021Px
| Want to join a Tek Scope eGroup mail list for information about these great instruments? Just Click on the link to the right to subscribe or view the information on line. |
CLICK to visit the Tek Scopes eGroup |
IMPORTANT !
Graphical logos and trademarks are the property of their respective owners, including Tektronix, Fluke, RCA, TI, GE, General Radio and Hewlett Packard, and are used here merely to unambiguously identify the products. Sphere Research IS NOT a factory authorized distributor for any of the product lines indicated. |
 Return to Sphere's Test Equipment Home Page
|
 | You are visitor number
 .
Site Design & contents copyright 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2014, 2020, 2022
by Walter Shawlee 2 & the ad hoc Godzilla Graphics Group.
All rights reserved.
|
This Section Updated Nov. 5/2022
SCROLL DOWN to see everything!
CLICK to SEE!
Home
Scopes
DMMs
Optics
Meters
